NL17SZ06XV5T2资料

NL17SZ06

Single Inverter with OpenDrain Outputs

The NL17SZ06 is a high performance single inverter with opendrain outputs operating from a 1.65 to 5.5 V supply.

The Output stage is open drain with Over Voltage Tolerance. Thisallows the NL17SZ06 to be used to interface 5.0 V circuits to circuitsof any voltage between 0 and +7.0 V.

Features

http://onsemi.com

MARKINGDIAGRAMS

5

1

SOT−353/SC70−5/SC−88A

DF SUFFIXCASE 419A

d = Date Code

5

5

1SOT−553XV5 SUFFIXCASE 463B

LFD

1LF D15

LFd

••••••••••

Tiny SOT−353 and SOT−553 Packages

Extremely High Speed: tPD 2.5 ns (typical) at VCC = 5.0 V

Designed for 1.65 V to 5.5 V VCC Operation, CMOS CompatibleOver Voltage Tolerant Inputs VIN may be Between 0 and 7.0 V forVCC Between 0.5 and 5.4 V

TTL Compatible − Interface Capability with 5.0 V TTL Logic withVCC = 2.7 V to 3.6 VLVCMOS Compatible

24 mA Output Sink Capability, Pullup may be between 0 and 7.0 VNear Zero Static Supply Current Substantially Reduces SystemPower Requirements

Chip Complexity: FET = 20Pb−Free Packages are Available

= Device Marking

= One Digit Date Code

PIN ASSIGNMENTPin1NC

1OVTIN A

25VCC

2345FunctionNCIN AGNDOUT YVCCGND34OUT YFUNCTION TABLEA InputLY OutputZLFigure 1. Pinout (Top View)

HIN A

1

OUT YORDERING INFORMATION

See detailed ordering and shipping information in the packagedimensions section on page 4 of this data sheet.

Figure 2. Logic Symbol

© Semiconductor Components Industries, LLC, 20051

January, 2005 − Rev. 3

Publication Order Number:

NL17SZ06/D

元器件交易网www.cecb2b.com

NL17SZ06

MAXIMUM RATINGS

SymbolVCCVIVOIIKIOKIOICCIGNDTSTGPDqJATLTJILatch−UpMSLFRESDDC Supply VoltageDC Input VoltageDC Output VoltageDC Input Diode CurrentDC Output Diode CurrentDC Output Sink CurrentDC Supply Current Per Supply PinDC Ground Current Per Ground PinStorage Temperature RangePower Dissipation in Still AirThermal ResistanceLead Temperature, 1 mm from Case for 10 SecondsJunction Temperature Under BiasLatchup PerformanceMoisture SensitivityFlammability RatingESD ClassificationOxygen Index: 28 to 34Human Body Model (Note 3)Machine Model (Note 4)Charged Device Model (Note 5)Above VCC and Below GND at 85°C (Note 5)SOT−353SOT−553SOT−353SOT−553Output in Z or LOW State (Note 1)VI < GNDVO < GNDCharacteristicsValue−0.5 to +7.0−0.5 ≤ VI ≤ +7.0−0.5 ≤ VO ≤ 7.0−50−50±50±100±100−65 to +150186135350496260+150±500Level 1UL 94 V−0 @ 0.125 inClass ICClass AN/AUnitVVVmAmAmAmAmA°CmW°C/W°C°CmAMaximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limitvalues (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,damage may occur and reliability may be affected.1.IO absolute maximum rating must be observed.

2.Tested to EIA/JESD22−A114−A, rated to EIA/JESD22−A114−B.3.Tested to EIA/JESD22−A115−A, rated to EIA/JESD22−A115−A.4.Tested to JESD22−C101−A.5.Tested to EIA/JESD78.

RECOMMENDED OPERATING CONDITIONS

SymbolVCCVIVOTADt/DVSupply VoltageInput VoltageOutput VoltageOperating Free−Air TemperatureInput Transition Rise or Fall RateVCC = 2.5 V ±0.2 VVCC = 3.0 V ±0.3 VVCC = 5.0 V ±0.5 V(Z or LOW State)ParameterOperatingData Retention OnlyMin1.651.500−40000Max5.55.55.55.5+8520105UnitVVV°Cns/Vhttp://onsemi.com

2

元器件交易网www.cecb2b.com

NL17SZ06

DC ELECTRICAL CHARACTERISTICS

VCC(V)1.65 to 1.952.3 to 5.51.65 to 1.952.3 to 5.5VIN = VILVOUT = VCC or GNDIOL = 100 mAIOL = 4 mAIOL = 8 mAIOL = 12 mAIOL = 16 mAIOL = 24 mAIOL = 32 mAIINIOFFICCInput Leakage CurrentPower Off−OutputLeakage CurrentQuiescent Supply CurrentVIN or VOUT = VCC or GNDVOUT = 5.5 VVIN = VCC or GND2.3 to 5.51.65 to 5.51.652.32.73.03.04.50 to 5.505.50.00.080.220.220.280.380.42TA = 25°CMin0.75 VCC0.7 VCC0.25 VCC0.3 VCC$5.00.10.240.30.40.40.550.55$0.11.01.0TypMax−40°C ≤ TA ≤ 85°CMin0.75 VCC0.7 VCC0.25 VCC0.3 VCC$10.00.10.240.30.40.40.550.55$1.01010mAmAmAMaxUnitVVmAVSymbolVIHVILILKGVOLParameterHigh−Level Input VoltageLow−Level Input VoltageZ−State OutputLeakage CurrentLow−Level OutputVoltageVIN = VIH or VILConditionAC ELECTRICAL CHARACTERISTICS tR = tF = 2.5 ns; CL = 50 pF; RL = 500 WTA = 25°CTyp5.33.02.42.45.32.52.11.2−40°C ≤ TA ≤ 85°CMin0.80.80.80.50.80.80.80.5MaxSymboltPZLParameterConditionVCC (V)1.65Min0.80.80.80.50.80.80.80.5Max11.63.63.23.0UnitnsPropagation Delay(Fi(Figure 3 and 4)3d4)RL = R1= 500 W, CL = 50 pF12.04.13.73.52.5 $0.23.3 $0.35.0 $0.51.65tPLZPropagation Delay(Fi(Figure 3 and 4)3d4)RL = R1= 500 W, CL = 50 pF11.63.63.23.012.04.13.73.5ns2.5 $0.23.3 $0.35.0 $0.5CAPACITIVE CHARACTERISTICS

SymbolCINCOUTCPDParameterInput CapacitanceOutput CapacitancePower Dissipation Capacitance (Note 6)ConditionVCC = 5.5 V, VI = 0 V or VCCVCC = 5.5 V, VI = 0 V or VCC10 MHz, VCC = 5.5 V, VI = 0 V or VCCTypicalu2.54.04.0UnitpFpFpF6.CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load.

Average operating current can be obtained by the equation: ICC(OPR) = CPD 󰀁 VCC 󰀁 fin + ICC. CPD is used to determine the no−load dynamicpower consumption; PD = CPD 󰀁 VCC2 󰀁 fin + ICC 󰀁 VCC.

http://onsemi.com

3

元器件交易网www.cecb2b.com

NL17SZ06

A

VCC

50%GND

tPZLY50% VCCtPLZHIGH

IMPEDANCE

VOL +0.3 VFigure 3. Switching Waveforms

VCCR1DUTRTCLRLPULSEGENERATORVCC x 2

RT = ZOUT of pulse generator (typically 50 W)

Figure 4. Test Circuit

DEVICE ORDERING INFORMATION

Device NomenclatureLogicCircuitIndicatorNLNo. ofGatesperPackage1TempRangeIdentifier7Tape &Reel SuffixT2DeviceOrder NumberNL17SZ06DFT2TechnologySZDeviceFunction06PackageSuffixDFPackageTypeSOT−353/SC70−5/SC−88ASOT−353/SC70−5/SC−88A(Pb−Free)SOT−553*Tape andReel Size†178 mm (7”)3000 Unit178 mm (7”)3000 UnitNL17SZ06DFT2GNL17SZ06DFT2NL17SZ06XV5T2NL17SZ06XV5T2178 mm (7”)4000 Unit†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel PackagingSpecifications Brochure, BRD8011/D.

*All Devices in Package SOT553 are Inherently Pb−Free.

http://onsemi.com

4

元器件交易网www.cecb2b.com

NL17SZ06

PACKAGE DIMENSIONS

SOT−353DF SUFFIX5−LEAD PACKAGECASE 419A−02ISSUE G

AG54NOTES:

1.DIMENSIONING AND TOLERANCINGPER ANSI Y14.5M, 1982.

2.CONTROLLING DIMENSION: INCH.3.419A−01 OBSOLETE. NEW STANDARD419A−02.

4.DIMENSIONS A AND B DO NOT INCLUDEMOLD FLASH, PROTRUSIONS, OR GATEBURRS.

S123−B−DIMABCDGHJKNSD 5 PL0.2 (0.008)MBMNJCINCHESMINMAX0.0710.0870.0450.0530.0310.0430.0040.0120.026 BSC−−−0.0040.0040.0100.0040.0120.008 REF0.0790.087MILLIMETERSMINMAX1.802.201.151.350.801.100.100.300.65 BSC−−−0.100.100.250.100.300.20 REF2.002.20HKSOLDERING FOOTPRINT*

0.500.01970.650.0250.650.0250.400.01571.90.0748SCALE 20:1mmǓǒinches*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering andMounting Techniques Reference Manual, SOLDERRM/D.

http://onsemi.com

5

元器件交易网www.cecb2b.com

NL17SZ06

PACKAGE DIMENSIONS

SOT−553XV5 SUFFIX5−LEAD PACKAGECASE 463B−01

ISSUE A

A−X−CK4NOTES:1.DIMENSIONING AND TOLERANCING PERANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETERS3.MAXIMUM LEAD THICKNESS INCLUDESLEAD FINISH THICKNESS. MINIMUM LEADTHICKNESS IS THE MINIMUM THICKNESSOF BASE MATERIAL.MILLIMETERSMINMAX1.501.701.101.300.500.600.170.270.50 BSC0.080.180.100.301.501.70BASE 1EMITTER 1/2BASE 2COLLECTOR 2COLLECTOR 1INCHESMINMAX0.0590.0670.0430.0510.0200.0240.0070.0110.020 BSC0.0030.0070.0040.0120.0590.067STYLE 2:PIN 1. 2. 3. 4. 5.CATHODEANODECATHODECATHODECATHODE5123B−Y−DS5 PLMGJXY0.08 (0.003)DIMABCDGJKSSTYLE 1:PIN 1. 2. 3. 4. 5.SOLDERING FOOTPRINT*0.30.01180.450.01771.350.05311.00.03940.50.50.01970.0197SCALE 20:1mmǓǒinches*For additional information on our Pb−Free strategy and soldering

details, please download the ON Semiconductor Soldering andMounting Techniques Reference Manual, SOLDERRM/D.

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further noticeto any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liabilityarising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. Alloperating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rightsnor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applicationsintended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. ShouldBuyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or deathassociated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an EqualOpportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

PUBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll FreeUSA/CanadaJapan: ON Semiconductor, Japan Customer Focus Center2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051Phone: 81−3−5773−3850http://onsemi.com6NL17SZ06/D