rac_进行grid自检时提示执行runfixup.sh脚本一例

原创作品，出自 深蓝的blog 博客，欢迎转载，转载时请务必注明以下出处，否则追究版权法律责任。 深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40779253 环境：CentOS 6.4 bit、grid bit、oracle11g bit 简述： 安装grid之前，手工

原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明以下出处，否则追究版权法律责任。

深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40779253

环境：CentOS 6.4 bit、grid bit、oracle11g bit

简述：

安装grid之前，手工进行环境检验，如下提示需要执行runfixup.sh脚本，以下将此

过程展现如下：

[grid@test1 grid]$ ./runcluvfy.sh stage -pre crsinst -n test1,test2 -fixup –verbose

--对两个节点进行安装grid检验

......

......

......

Check: Time zone consistency

Result: Time zone consistency check passed

Fixup information has been generated for following node(s):

test2,test1

Please run the following script on each node as "root" user to execute the fixups:

'/tmp/CVU_11.2.0.3.0_grid/runfixup.sh'

Pre-check for cluster services setup was unsuccessful on all the nodes.

[root@test1~]# /tmp/CVU_11.2.0.3.0_grid/runfixup.sh

--在节点1上执行脚本

Response file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.response

Enable file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.enable

Log file location: /tmp/CVU_11.2.0.3.0_grid/orarun.log

uid=501(grid) gid=501(oinstall) groups=501(oinstall),502(dba),503(asmadmin),504(asmdba),505(asmoper)

[root@test2 ~]# /tmp/CVU_11.2.0.3.0_grid/runfixup.sh

--在节点2上执行脚本

Response file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.response

Enable file being used is :/tmp/CVU_11.2.0.3.0_grid/fixup.enable

Log file location: /tmp/CVU_11.2.0.3.0_grid/orarun.log

uid=501(grid) gid=501(oinstall) groups=501(oinstall),502(dba),503(asmadmin),504(asmdba),505(asmoper)

将脚本执行完后，该提示不再出现，接下来顺利安装grid即可。

原创作品，出自 “深蓝的blog” 博客，欢迎转载，转载时请务必注明以下出处，否则追究版权法律责任。

深蓝的blog：http://blog.csdn.net/huangyanlong/article/details/40779253